Build the door: the front of the front and the front overlap for the door (also called fold door ". The big skirt on the door will generally have a button, the front on the door will generally have a button.
Hanging noodles: inside the door there is a layer more than twice the wider of the door, used to enhance the fastness of the nail button and hole. Because of its hanging in the inside of the door, so called hanging noodles.
Stop: the place where the clothes need to be stitched with thread, the edge of the clothing parts, such as the suture of the door and the noodles, the suture of the bag cover surface and the lining, etc.
Over the shoulder: refers to the two layers of clothing covered by the shoulders of a certain style of top, also known as the compound shoulder (commonly used in textile shirts).
Barter head: open turning collar, the part where the upper section of the noodle turns outward
Serial line: the connecting line between the collar and the barge head is also the line to determine the position of the gap. Some of the collar are connected, with no serial line such as green fruit collar.
Gap: the horn name gap formed between the collar surface and the barge head, and the gap of the closing collar refers to the width between the collar point and the upper end of the door.
Sleeves large: suit type two pieces of sleeve outside a larger, called sleeve large, inside a smaller, called sleeve small piece, gap closed, from the outside can not see the stitches.
Kefu: foreign language, refers to the rectangular double layer straight material sewn at the edge of the cuff
Yuke: In a foreign language, some styles are above the front and back garment pieces, and the part that needs to be cut horizontally is called Yuke
Pants: the width of the leg, also the foot.
Middle range: the middle of the trouser leg
Upper collar line: the peripheral line of the collar
Undercollar line: the line between the collar and the neckline
Bottom collar: collar within the folding line is the bottom collar, also called the collar seat.
Fp: the part of the folding line is called lapel.
Sleeve Mountain: The curved part of the upper end of the sleeve
Sleeve hole: the sleeve hole formed on the side after the front and rear stitching of the jacket.
Drawing shun: in the structural design of the connection of the straight line and the arc, or the connection of the arc and the arc, the line segment should be straight, round shun, can not appear edges and corners. The industry is called painting shun.

Crack: also known as chain shape, the seam like fried dough sticks or chains, not flat.
Also: also called return mouth, refers to the raw material silk lock is pulled askew, such as the collar circle pull also or sleeve hole also mouth.
Shell: also known as shell, the surface, lining does not fit, that is, the lining head is tight, fabric loose, inside and outside do not match.
Back potential: also known as wave potential, fabric through ironing, in the surrounding edge of the pull part of the flounces or wavy.
Eye socket: refers to the missing mouth and serial mouth parts are not flat wear.
Sitting potential: the stop place of the seam face did not turn over enough.
Exposed: refers to the mouth, collar foot exposed, inside the long coat, etc.
Empty: the inside and outside of the two layers are not tight.
Fall: the shoulder seam slope is insufficient, causing the front and back sleeve hole sinking.
Aurora: When ironing, the underlying cloth is too hard, or without the wet cover.
Splash: ironing marks the water point or wet cloth not hot evenly and produce water marks.
Nest potential: with the contrary, there is a better inside and outside.
Inner and outer uniform: refers to the fabric in the process operation of the layer of potential.
Outer play: also known as push play, when ironing consciously let the garment fabric silk lock to the outside, in order to prevent shrinkage, such as the front garment piece in the door, the waist part of the silk lock to the direction of the stop is.
Wipe off: it is a kind of manual measure to prevent garment piece from producing silk curve and oblique.
Spit the mouth: also known as stop the mouth vomit, stop the mouth of the noodles should not be seen, vomit the mouth refers to the noodles exposed.
Layer: also known as eating potential, bending potential, refers to sewing two pieces of short sewing objects, a slightly longer one has a proper layer potential, so that sewing objects produce nest potential.
Deng: have three-dimensional sense namely, opposite with flat, be like back ascend square, not curved.
Wing: also called suction, such as the province under the sleeve hole, namely called threat, to make the plane clothing suction into, in line with the body requirements.
Symmetry: refers to the uniform garment piece.
Pull out: also known as pull wide, through ironing to make a part of the fabric extended, such as the chest, back and after the crotch seam of the pants are called pull out.
Return to close: call return to shrink again, according to body shape need, when sewing garment certain part appropriate pull some, if before and after sleeve hole request shrink, namely the meaning that shorten some.